Original Honda position for tank decals:-
1 From the bottom of the word SUPER SPORT to the welded seam is 95mm.
2 The spacing between the two lines is as supplied i.e. 10mm.
3 The ‘N’ in HONDA is positioned in line with the centre of the petrol hole.
Application advice:
1 Wait at least 24 hours after painting (ideally 7 days) before applying decals, this allows the volatile solvents to escape.
2 Apply at room temperature only.
3 Always ask your supplier for application advice i.e. wet or dry application, whether to clear coat etc.
4 Remove any air bubbles with a pin.
Aftercare:
Clear coated decals should last for many years however, always wipe off any petrol spills immediately.